1. Care must be taken in the use process. When assembling or detaching model props, all model parts should be placed on soft objects as far as possible, so as to avoid bumping or scratching the models due to too much force, especially the edges and corners of the joints of the models are most likely to collapse and produce gaps.

2. When placing models in shopping malls, try to put them on the side (i.e. places where customers are not easy to knock down or trip over), because models are fragile products. If they fall down, the accessories of various interface positions are most likely to fall off and make the models unable to use.

3. The model should not be placed in the direct sunlight or the spotlight is too strong. The paint on the model surface will change color if it is often irradiated.

4. When the model is accidentally soiled, the following methods can be used for cleaning.

The surface of model props is white paint, which depends on whether the model has just been used for a long time or not. If it's a white model that has just been used for a long time, you can gently wipe it with a clean wet cloth or rubber. When using the rubber, you should pay attention to it gently. Otherwise, the part you wipe is much brighter than other places. If it is used for a long time, you can use a clean wet cloth and a little detergent to clean it, because the white model that has been used for too long will turn yellow. When the model's surface is painted in other colors, rubber and detergent are most commonly used. But there are some stubborn can not be removed, at this time consider using universal water for cleaning, pay attention to the concentration of universal water Oh, if it is too thick, you must add water to dilute and then clean, if not, the paint will not be washed off!